Regulatory Information
viii FIP-500
European Wireless Compliance Related
Information
Your unit is designed to operate in the Bluetooth and WLAN 2.4 GHz bands,
and at 13.56 MHz for NFC/RFID.
The information about the Bluetooth and Wi-Fi frequency bands is as
follows:
Bluetooth: Between the frequencies 2402 MHz - 2480 MHz.
The output power is 11.7 dBm typical.
Wi-Fi: Channels 1 through 13 - Between the frequencies 2412 MHz -
2472 MHz.
The maximum output power is 18.5 dBm.
This is a 2.4 GHz wideband transmission system (transceiver), intended for
use in all EU member states and EFTA countries.
Local Restrictions on 802.11a, 802.11b, 802.11d,
802.11g, 802.11n, and 802.11ac Radio Usage
Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11d,
802.11g, 802.11n, and 802.11ac wireless LAN devices may not yet be
harmonized in all countries, 802.11a, 802.11b, 802.11d, 802.11g, 802.11n,
and 802.11ac products are designed for use only in specific countries, and
are not allowed to be operated in countries other than those of designated
use. As a user of these products, you are responsible for ensuring that the
products are used only in the countries for which they were intended and
for verifying that they are configured with the correct selection of
frequency and channel for the country of use.
To Next Page
Loading...
