Working with Your Unit
MAX-700 235
Printing Documents
4. From the General tab, select the desired printer (PDFCreator by
default).
5. If necessary, tap Preferences to adjust the parameters to your needs.
Note: If you selected a network printer, you can save the whole set of preferences
for future use with the Save As button.
6. Tap Print to start the printing process.
7. If you selected PDFCreator, proceed as follows:
7a. Enter the desired information. If you want to view the PDF file
immediately after its creation, select the After saving open the
document with the default program check box.
7b. Tap Save.
7c. Specify a location and a file name and tap Save.
If you have selected the option to view the PDF file after its
creation, the SumatraPDF reader will display the new file.
7d. If necessary, tap to close the SumatraPDF window.
8. Tap to close Internet Explorer and return to the Utilities tab.
To view the PDF file
immediately after its
creation
To Next Page
Loading...
