Testing Fibers in Advanced Mode
MAX-700 59
11. Once the analysis is complete, save the trace by pressing Quick Save
in the button bar.
The application will use a file name based on the autonaming
parameters you defined (see Naming Trace Files Automatically on
page 44). This file name appears at the top of the graph and at the top
of the linear view table.
Note: The application will only display the Save File dialog box if you have
activated the feature to always be prompted when you save a file. From
this dialog box, you can change the location, the file name and the file
format.
11a.If necessary, change the folder to which the file will be saved by
pressing the Location button.
11b.If necessary, specify a file name.
12. Press OK to confirm.
IMPORTANT
If you enter the name of an existing trace, the original file will be
replaced with the new file.
To Next Page
Loading...
