Pilot’s Operating Handbook Section 4
EXTRA 500 Normal Procedures
8 Engine and Propeller
Item Condition
Engine Cowlings Check condition
Engine Air Intake
Check uncovered,
clear and condition
Engine Exhausts
Check uncovered and
condition
Engine Oil Level Check in limits
Oil Access Panel Check closed, secured
Towing Bar Removed
Nose Gear, Gear Door,
Wheel and Tire
Check condition
Antennas Check condition
Caution
Blade shake is allowed up to 3 mm (1/8 inch) and a blade
angle play of 2° is acceptable. No critical cracks in the
blades. Metal corrosion sheet may not be loose. If not,
replace within the next 10 hours after last inspection.
Propeller and Spinner
Check for condition, oil leaks,
blade movements
Propeller De-Ice Pads Check condition
Front Window
Check for cracks and
contamination
26. January 2011
4-11
To Next Page
Loading...
