Extreme Networks Summit X460 Series - Page 337

Installing a Versatile Interface Module in a Summit X480, X650, or X670 Series Switch
Summit Family Switches Hardware Installation Guide
337
5 Install the VIM in the switch (Figure 283):
a Make sure the inserter/ejector levers are rotated down.
b Carefully slide the module into the switch until the inserter/ejector levers begin to rotate upward.
c Simultaneously rotate both levers upward to seat the module internal connectors.
d Insert and tighten the retaining screws you removed earlier.
Figure 283: Installing a Versatile Interface Module
SH_132
SH_260
VIM2-SummitStack module
VIM4-40G4X module