FARGO electronics HDP5000 single-side User Manual

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4)
3-21
Connecting Power to HDP5000 Printer and Lamination Module (continued)
Display B - Connecting the other end of the AC power cable to a Surge Protector. See both
notes below.
Note No. 1: Instead of connecting the AC power cable directly into an AC outlet, it is
recommended that a Surge Protector be used to protect against power surges.
Note No. 2: Some buildings have surge protection built into the electrical outlets. Please
consult your building supervisor regarding this feature.

FARGO electronics HDP5000 single-side Specifications

General

Brand	FARGO electronics
Model	HDP5000 single-side
Category	Printer
Language	English