To Next Page
C
Colleen AndersonSep 1, 2025
How to fix FARGO electronics HDPii Printer card jam in PROX area?
- AAnthony RodriguezSep 1, 2025
If your FARGO electronics Printer has a card jammed in the PROX card encoding area, clear the jam.
How to fix FARGO electronics HDPii Printer card jam in PROX area?
If your FARGO electronics Printer has a card jammed in the PROX card encoding area, clear the jam.
Why did card feed stop on my FARGO electronics Printer?
If the card feed stops on your FARGO electronics Printer, it could be because the Front Cover was opened, which caused the card transfer to stop, or the pause button was selected. Press Resume or Cancel to continue.
What to do if FARGO electronics HDPii Printer says remove card?
If your FARGO electronics Printer displays a 'Remove Card' error, it means a card is jammed in the Print Station or card flipping area of the Printer. Clear the jam and press Cancel.
How to fix FARGO electronics HDPii Printer multiple feed error?
If your FARGO electronics Printer is experiencing multiple feeds, it means multiple cards were fed into the Printer. Remove all cards and try again.
How to resolve FARGO electronics HDPii no ribbon error?
If your FARGO electronics Printer indicates that no ribbon is installed, or that the Ribbon RFID tag is bad, install the correct Ribbon and press the Resume button located on the Printer’s LCD display. To cancel the print, press the Cancel Print button from the Driver's display dialog and the Cancel button located on the Printer's LCD display.
How to resolve FARGO electronics Printer film out error?
If your FARGO electronics Printer indicates that the film has run out, install a new roll of film and press Resume to continue, or Cancel to reset.
What to do if FARGO electronics HDPii Printer says card not found?
If your FARGO electronics Printer displays a 'Card Not Found' error, this indicates that the card cannot be found in the Printer. First, verify that the card is not jammed in the Printer, and then select Cancel.
What to do if FARGO electronics HDPii says cover is open?
If your FARGO electronics Printer displays the message that the cover is open, it is because the cover was left open. Ensure that the cover is properly closed.
How to fix FARGO electronics HDPii Printer unable to feed card?
If your FARGO electronics Printer is unable to feed a card from the Card Cartridge, verify there are cards in the cartridge. Also, verify cards are not stuck together or jammed, and that they are the correct thickness.
Details the printer's technical attributes including card thickness, types, cleaning, colors, capacity, interface, and dimensions.
Describes key components like the printhead, card cartridge, output hopper, and interface ports.
Provides critical safety instructions and warnings for printer installation to prevent injury or damage.
Guides on loading essential supplies like print ribbons, transfer film, cleaning rollers, and blank cards.
Step-by-step instructions for installing the printer driver software from the CD or web.
Lists and explains various messages displayed on the printer's LCD screen.
Provides tables for LCD and printer error messages, including causes and solutions.
Guides on setting up network parameters like IP address, subnet mask, and DHCP.
Provides procedures to resolve issues with Ethernet printer connectivity and printing.
Details how to install printer driver updates and set up the printer driver.
Provides instructions on how to download and install new firmware for the printer.
General| Brand | FARGO electronics |
|---|---|
| Model | HDPii |
| Category | Printer |
| Language | English |
