Page 44 of 91
temperature level in no supervisory mode on this
reported value. Beyond this value, the alarm go active
(mod. Range: 40°-70°).
NSUP.TEMP LEV: if set up, all the multi-criteria heat detectors acquire the
temperature level in no supervisory mode on this
reported value. Beyond this value, the alarm go active
(mod. Range: 40°-70°).
SUP.SMOK LEV: if set up, all the multi-criteria smoke detectors acquire
the smoke level in supervisory mode on this reported
value. This level refers at the SMOKE value (mod.
Range: 80-150). Beyond this value, the alarm goes
active.
NSUP.SMK LEV: if set up, all the multi-criteria smoke detectors acquire
the smoke level in no supervisory mode on this
reported value. This level refers at the SMOKE value
(mod. Range: 80-150). Beyond this value, the alarm
goes active.
To Next Page
Loading...
