11
© Ferno s.r.l. Rel.05042024
XT Series Extrication Devices
3. Then insert it in the second loop and pull to fasten the strap (Figure 2D).
2C
2D
2B
2. Insert the strap in the rst loop of the fastening buckle (Figures 2B and 2C).
4. Finally, reinsert the strap into the rst loop to ensure a tight t and prevent the strap from coming loose.
2E
Figures 2A, 2B, 2C, 2D, 2E, 2F - Triangular head immobiliser assembly
2F
To Next Page
Loading...
