Ferno XT PRO - Ferno Technical Support; Ferno Customer Service; Limitation of Liability; Intellectual Property Declaration

3
© Ferno s.r.l. Rel.05042024
XT Series Extrication Devices
© Copyright Ferno S.R.L. All rights reserved.
USER AND MAINTENANCE MANUAL
Additional free copies can be downloaded online at
www.ferno.it.
Limitation of liability
This manual contains general instructions on the use and
maintenance of the product. The instructions do not cover all
possible applications and operations. The user is solely responsible
for proper and safe use of the product in compliance with local
regulations. The safety information is provided as a service to the
user and ensures only the minimum required level of safety to
prevent injury to operators and patients. Any other safety measure
implemented by the user must comply with applicable regulations.
Before using the product, it is strongly recommended that staff be
trained in its correct usage. Retain this manual for future reference.
In case of change of ownership, ensure that the manual remains
with the product. Additional free copies can be downloaded online
at www.ferno.it.
It is prohibited to reproduce this manual, either in full or in part,
without the prior consent of Ferno S.R.L.
Limited warranty
Ferno products are covered by a 24-month warranty against
manufacturing defects. For the full terms and conditions of
warranty and liability, see chapter Warranty.
Ferno Technical Support
Customer Service and Technical Support are important aspects of
every Ferno product. Before contacting us, note the serial number
of the product and specify it in all written communications. For all
queries concerning technical support, contact Ferno S.R.L.:
E-mail assistenza.it@ferno.com
Website dedicated to support - Ferno SOS www.fernosos.it
Phone 0039 0516860028
Phone (toll-free for Italy) 800.501.711
Fax (+39) 0516861508
Ferno S.R.L. is authorised to carry out preventive and corrective
maintenance (repairs) on all Ferno products in exclusivity.
Any corrective action MUST necessarily be carried out by FERNO
personnel and the operations must be carried out using original
spare parts. In this way, the warranty is also extended to the
components involved in the operation.
Any corrective action carried out by non Ferno personnel will
automatically cancel any Civil Liability insurance and any
guarantee.
Ferno Customer Service
For further details, please contact Ferno S.R.L.'s Customer Service:
MANUFACTURER
Ferno S.R.L., Via Benedetto Zallone 26
40066 - Pieve di Cento (BO) - ITALY
Phone (toll-free for Italy) 800.501.711
Phone (+39) 0516860028
Fax (+39) 0516861508
Website www.ferno.it
Intellectual property declaration
The information in this manual is the property of Ferno S.R.L. -
Via Benedetto Zallone 26, 40066 Pieve di Cento (Bologna) Italy.
All patent rights, design, construction, reproduction, use and
sale rights relating to any item covered in this manual are the
condential and exclusive property of Ferno S.R.L., except for
rights expressly transferred to third parties or not attributable to
parties owned by the supplier.