Ferno XT PRO - General Technical Specifications

9
© Ferno s.r.l. Rel.05042024
XT Series Extrication Devices
3.2.1 General technical specications
Ferno reserves the right to change the specications without
notice. For further details, please contact Ferno's Customer
Service (page 2).
COMPONENTS OF THE EXTRICATION DEVICE
● Board with holes for restraint fastening
● QHI (Quick Head Immobilizer)
● Neoprene triangular head immobiliser
● Chin strap for QHI
● The yellow and red upper chest restraints are provided
with red lifting and carrying handle
● Black and green lower groin restraints
● Auxiliary handles (x 2)
Materials
XT Board Composite material
Quick Head Immobiliser Polyurethane
Restraints Polyester
Buckles Plastic
Triangular head immobiliser and chin strap Neoprene
WARNING
Untrained users may injure themselves, cause
damage and/or physical harm. Allow only trained
and qualied sta to use the XT extrication device.
WARNING
Never exceed the load capacity of the extrication
device specied in this manual.
Load capacity
160 kg
352 lb
Assembled product specications
Length 830 mm
Width 300 mm
Thickness 60 mm
Weight (including accessories) 2 kg
Load capacity 160 kg