Ferno XT PRO - Xt Floating - Inspection Sheet

78
© Ferno s.r.l. Rel.05042024
XT Series Extrication Devices
XT FLOATING  INSPECTION SHEET
Serial number
Purchased on
First used on
Inspection frequency
Overhaul frequency
Board
YES /
NO
The graphical instructions on the board are
still readable.
Every portion of the board is undamaged
and rigid.
No scratches or cracks more than 1 mm
deep on both sides of the board.
No damage or sharp edges on external
borders of the board.
The slots for tting the restraints are
undamaged.
Triangular head
immobiliser and chin strap
YES /
NO
The triangular head immobiliser and the
chin strap do not show any damage or cuts.
The triangular head immobiliser and the
chin strap are rmly fastened to the board.
The fastening buckles on the triangular
head immobiliser and the chin strap are
undamaged and allow the restraints to
slide properly.
Quick Head Immobilizer
YES /
NO
The cushion is undamaged.
The cushion remains attached to the board
quite rmly.
Restraints, auxiliary
handles and oats
YES /
NO
The auxiliary straps and handles do not
show any damage or cuts.
The straps are correctly positioned,
according to Ferno's instructions and
colour code.
The auxiliary straps and handles are rmly
fastened to the board.
The cow hitch that connects the auxiliary
straps and handles to the board has been
tied as Ferno requires.
The fastening buckles are undamaged,
free from any deformation, cracks and/or
crevices.
The fastening buckles are working
properly (they can be opened and closed
effortlessly).
The straps are easily passed into the
buckles to adjust their tension and remain
locked in the desired position.
The oats and their sleeves are undamaged
and uncut.
The oats are all present and are
positioned as per the user manual.
The oats are rmly fastened to the board.
The signal light is undamaged and
functioning properly.