Ferno XT PRO - General Technical Specifications

25
© Ferno s.r.l. Rel.05042024
XT Series Extrication Devices
4.2.1 General technical specications
Ferno reserves the right to change the specications without
notice. For further details, please contact Ferno's Customer
Service (Section Ferno Customer Service).
COMPONENTS OF THE XT PRO EXTRICATION DEVICE
● Board with holes for restraint fastening
● QHI (Quick Head Immobilizer)
● Neoprene triangular head immobiliser
● Chin strap for QHI
● Yellow and red upper chest restraints with reective
slots, “Cobra” buckles and integrated red lifting and
carrying handles
● Black and green lower groin restraints provided with
red lifting and carrying handle
● Thigh padding for groin restraints (x 2)
● Auxiliary handles (x 2)
● Snap hook
● Lifting tape
Materials
XT Board Composite material
Quick Head Immobiliser Polyurethane
Restraints Polyester
Buckles Aluminium alloy
Triangular head immobiliser and chin strap Neoprene
Assembled product specications
Length 830 mm
Width 300 mm
Thickness 60 mm
Weight (including accessories) 3.4 kg
Load capacity 160 kg
WARNING
Untrained users may injure themselves, cause
damage and/or physical harm. Allow only trained
and qualied sta to use the XT PRO extrication
device.
WARNING
Never exceed the load capacity of the extrication
device specied in this manual.
“Cobra” buckles - 18 kN
Lifting strap - Capacity 45 kN
Lifting snap hook - Capacity 50 kN
Read the user
manual carefully
At least two
qualied
operators
2
Load capacity
160 kg
352 lb