Ferno XT PRO - Components (XT Floating Extrication Device); General Technical Specifications

55
© Ferno s.r.l. Rel.05042024
XT Series Extrication Devices
WARNING
Head fastening systems, triangular head
immobiliser and chin strap are attached to the
head-end oat and to the connection above the
main oats by means of special rings.
6.2.1 General technical specications
Ferno reserves the right to change the specications without
notice. For further details, please contact Ferno's Customer
Service (page 2).
COMPONENTS OF THE XT FLOATING EXTRICATION
DEVICE
● Board with holes for restraint fastening
● QHI (Quick Head Immobilizer)
● Neoprene triangular head immobiliser
● Chin strap for QHI
● Red and yellow transverse restraints
● Carrying handles (x 4)
● Head end oats
● Breast oats (x 2)
● Longitudinal restraint
● Automatic strobe rescue light
Materials
XT Board Composite material
Quick Head Immobiliser Polyurethane
Restraints Polyester
Buckles Aluminium alloy
Triangular head immobiliser and chin strap Neoprene
Floats Polyester, Spandex and Polyethylene
Assembled product specications
Length 1200 mm
Width 350 mm
Thickness 65 mm
Weight (including accessories) 3.3 kg
Load capacity 160 kg
WARNING
Untrained users may injure themselves, cause
damage and/or physical harm. Allow only trained
and qualied sta to use the XT Floating extrication
device.
WARNING
Never exceed the load capacity of the extrication
device specied in this manual.
Read the user
manual carefully
At least two
qualied
operators
2
Load capacity
160 kg
352 lb