Ferno XT PRO - Ready-To-Use Configuration

17
© Ferno s.r.l. Rel.05042024
XT Series Extrication Devices
Important
Before proceeding with the application of the XT, make sure that the triangular head immobiliser is loose enough to be
placed on the back of the board, so that it can be gripped together with the board when inserting the device behind the
patient's back.
Figure 13 - Possible “ready-to-use” congurations.
13A 13B
3.4.2 “Ready-to-use” conguration
Before extricating the patient, prepare the device in “Ready-to-use” conguration, following the instructions below:
● Unfasten the buckles of all restraints.
● Join the chest and groin restraints so that they remain at the sides of the device and so that the board is free and ready to
be inserted behind the patient's back (Figure 13).
● Ensure that the triangular head immobiliser restraints are sufciently loose and that the chin strap is properly stowed in
relevant bag.