Ferno XT PRO - Assembling the Auxiliary Handles; Use of the XT PLUS Extrication Device; Before Putting the Extrication Device into Service

16
© Ferno s.r.l. Rel.05042024
XT Series Extrication Devices
3.3.5 Assembling the auxiliary
handles
The red carrying handles are removable and independent,
so they can be moved as required. For example, they can be
connected to the middle handles to make them longer and allow
extrication even with larger patients. As an alternative, they
can be directly secured to the board using any available hole.
To attach the red handles, follow the xing procedure with
cow hitch (Figures 11A, 11B and 11C).
3.4.1 Before putting the extrication
device into service
Staff using the extrication device must have carefully read
and understood the information contained in this manual.
Before any operation with the extrication device, ensure
that:
● The QHI head immobiliser, the triangular head
immobiliser and the chin strap are correctly tted and
ready for use.
● All restraints have been correctly applied.
● Ensure that the device does not show any signs of
damage or wear, and that it is fully operational. Refer
to section “Inspection”.
3.4 - Use of the XT PLUS extrication device
Read the user
manual carefully
At least two
qualied
operators
2
Load capacity
160 kg
352 lb
11A
11B
11C
Figure 11 - Application of auxiliary handles
Figure 12 - Complete XT Plus conguration