38
© Ferno s.r.l. Rel.05042024
XT Series Extrication Devices
WARNING
Duly adjust the straps' tension, making sure that
they are rm and well balanced.
To apply the chest restraint, extend the male end of the restraint and pass it over the patient's shoulder, bringing it diagonally
across to the opposite side.
Attach the “Cobra” buckle according to the colour code (Figure 49A) and tension the restraint so that it is properly secured
(Figure 49B).
Apply the second chest restraint following the same procedure (Figures 49C and 49D).
Figure 49 - Application of chest restraints
Figure 50 - XT PRO nal conguration
49A 49B
49D
49C
To move the patient, use the specic red handles.
Follow the reference procedures for patient handling.
To Next Page
Loading...
