Ferno XT PRO - Page 49

49
© Ferno s.r.l. Rel.05042024
XT Series Extrication Devices
Figure 80 - Grabbing the groin restraints
Figure 81 - Extending the groin restraints
Figure 82 - Passing the thigh straps under the thigh
This strap, once fastened, will create a sort of seat for
extrication, so it must be well tightened. In order to ensure
adequate tightening, it is advisable to slide the strap, with a
"saw-like" movement, as far as possible under the buttocks
(Figure 83) with the help of your hands while pulling the
end between the legs (Figure 84).
Figure 83 - Tightening the groin restraint
Figure 84 - Tightened groin restraint
Once this has been achieved, pass the groin restraint along
the upper part of the same thigh, in order to reach the female
buckle on the other side of the restraint (Figure 85). Again,
the colour coding of the restraints will be respected (Figure
86).
Figure 85 - Attaching the groin restraint