2.1 FITTING THE COMPONENTS
WARNING
Before fitting the components switch off the
following:
•
the compressed air supply
•
the power supply for the outputs
(pin 2)
•
the power supply for the electronic
components (pin 1)
You thereby avoid:
• uncontrolled movement of loose tubing
• undesired movements of the connected actu-
ators
• undefined switching states of the electronic
components.
CAUTION
The valve terminal components contain parts
which can be damaged by electrostatic
charges.
•
Do not therefore touch the contact surfaces
of the plug connectors at the side of the
modules.
•
Observe teh instructions for dealing with
components liable to damage by electro-
static charges.
You thereby avoid destroying the valve terminal
components.
VIFB6 - 03/05 2. Fitting
9809c 2-3
To Next Page
Loading...
