Connecting to optical-fibre waveguide
Connection to the bus can also be made with a
optical-fibre waveguide. Contact Connectors
offer a ready-to-use data transfer system "ZYLIN
RS485" for this purpose. This can be connected
to the valve terminal. The ZYLIN 485 system it
self-supplying and consists of two pin-compatible
9-pin IP 67 round plugs, integrated optoelec-
tronics and plastic optical-fibre waveguide.
Advantages:
–
large transmission band width
–
insensitive to electrical and magnetic
interference
–
low weight
–
low space requirements
Further information, order forms and technical
specifications can be obtained from:
Fa. Contact Connectors GmbH
Gewerbestrasse 30
70565 Stuttgart
Germany
Internet: Lappgroup.com
VIFB6 - 03/05 3. Installation
9809c 3-41
To Next Page
Loading...
