Connecting the remote bus for
floating operation
The valve terminal is prepared for floating
operation on the remote bus. Check with the
standards and guidelines (e.g. VDE...) applicable
to your application, to see if it is suitable for
floating operation.
Further information on installing an INTERBUS
system is to be found in the INTERBUS
installation manual.
Source of supply:
Phoenix Contact GmbH & Co.
Postfach 1341
32 819 Blomberg
Germany
Designation: IBS SYS INST UME
Order no.: 27 54 80 4
VIFB6 - 03/05 3. Installation
3-40
9809c
To Next Page
Loading...
