Festo 03 - Page 5

Chapter 3 INSTALLATION
3.1 SUMMARY OF INSTALLATION 3-3
System structure on the remote bus 3-3
System structure on the
installation remote bus 3-5
3.2 GENERAL
CONNECTION METHODS 3-7
Selecting the field bus cable 3-8
Selecting the operating voltage cable 3-9
Connecting the cables to the
plugs/sockets 3-10
3.3 BUS NODE 3-15
Opening and closing the node 3-15
Configuration settings in the node 3-18
Setting the DIL switch elements 3-19
3.3.1 Type 03:
Connecting the operating voltages 3-20
3.3.2 Type 05:
Connecting the operating voltages 3-28
3.3.3 Connecting the INTERBUS interface 3-37
Floating connection 3-38
Non-floating connection 3-39
Connecting the remote bus for
floating operation 3-40
Connecting to optical-fibre
waveguide 3-41
Connecting the remote bus for
non-floating operation 3-42
Connecting the installation remote
bus for non-floating operation 3-44
VIFB6 - 03/05
IV
9809c