© Festo Didactic 759614
15
3 Holder systems
The holder systems included with the EduTrainer
®
Compact and EduTrainer
®
Universal product ranges are
described in the following sections.
3.1 EduTrainer
®
Compact holder system
Size 1: ER end housing (left) for mounting Size 2: ER end housing (left) for mounting the controller
the controller with various mounting rails and with various mounting rails, ER middle housing and
ER end housing (right) for mounting 19" modules ER end housing (right) for mounting 19" modules
with a width of up to 9 HP with a width of up to 33 HP
Size 3: ER end housing (left) for mounting the controller with various mounting rails, two ER middle housings and ER end housing
(right) for mounting 19" modules with a width of up to 57 HP
To Next Page
Loading...