3. Installation
3-33
Festo P.BE-MPA-EN en 1108e
Example of address assignment
Caution
Note that addresses may be shifted if the valve terminal is
extended at a later stage.
In the following example, an MPA-S valve terminal type
MPA-MPM-PI with the follo w i ng components is addressed:
Components
MPA1 MPA2
Connection
blocks
2(8valvepositions) 2 (4 valve positions)
Electronic
module
1VMPA1-M PM-EMM-8
1VMPA1-M PM-EMM-4
1VMPA2-M PM-EMM-4
1VMPA2-M PM-EMM-2
Tab. 3/9: Example: Electronics module for multi-pin plug
connection
To Next Page
Loading...
