5. Maintenance and conversion
5-13
Festo P.BE-MPA-EN en 1108e
Note
The electrical function of an MPA pneumatic module is
determined by the electronics module used, e.g.:
– Electromagnetic compatibility (EMC)
– Switching off the valve supply voltage at all poles
You must observe the instructions in the MPA-...
electronics description if you wish to install an electronics
module of a different type.
Recommendation:
Replace only with electronics modules of the same type.
The electronics modules type VMPA...-FB-... support the
control of two valve solenoid coils per valve position.
To Next Page
Loading...
