Sorting Station Inline
© Festo Didactic 8129444
13
5 Work instructions and safety precautions
5.1 General information
CAUTION
Trainees should work with the components and systems only under the
supervision of an instructor.
Observe the specifications included in the datasheets for the individual
components, and in particular all safety information!
Wear your personal protective equipment (safety goggles, safety shoes) when
working on the circuits.
5.2 Mechanical system
WARNING
Switch off the power supply!
– Switch off both the operating power and the control power before working on
the circuit.
– Only reach into the setup when it is at a complete standstill.
– Be aware of potential overtravel times for the actuators.
Risk of injury during troubleshooting!
Use a tool such as a screwdriver when actuating mechanical limit switches.
CAUTION
Mount all of the components securely on the profile plate.
Make sure limit switches are not operated from the front.
Set up all components up so that it is easy to operate switches and separators.
Follow the instructions regarding positioning of the components.
To Next Page
Loading...
