7978
7
CONTURO KA 65 Accessories for bench-mounted applications
Perforated board KA 65 LP-KA 65 MFT/3
Perforated board for stationary use of the CONTURO in the MFT. For use in
combination with adapter plate AP-KA 65. Includes M4 reducing rings for
attaching guide plates.
X With cut-outs for stationary use of the edge bander in the MFT multifunction
table in combination with the adapter plate AP-KA 65
Adapter plate AP-KA 65
Adapter plate for using the CONTURO as a stationary machine. Mounting plate
complete with 15 guide plates.
Length 254 mm, width 420 mm, swivel range: 0 – 47°
X For mounting the edge bander on a workbench
X For small batches, straight edges, free form elements and gluing inclined
edges, angle from 0 - 47°
X Adapter plate for installation in the MFT (with perforated board KA 65)
or a separate workbench
X Sliding guides for guiding the workpiece safely
X Allows the user to swivel the machine (0 - 47°) in the bench and position the
workpiece horizontally during edging - for convenient and safe guidance,
even with larger objects
Guide plate MFT GP-KA 65 MFT/3
15 guide plates, for guiding workpieces in stationary applications.
Length 255 mm, width 31 mm, height 6 mm
X Replacement or extension guide plates for the stationary use of the edge
bander with adapter plate AP-KA 65 in MFT (with perforated board KA 65)
or installed in a separate workbench
X Guide plates for attachment using chipboard screws or M4 screws included
with the delivery
2014_FES_EN_CONTURO.indb 79 11.12.13 11:52
To Next Page
Loading...
