14 Finometer® Model-2 User’s Guide
6.1.2
Warnings on cuff handling 62
6.1.3 Cuff application 62
6.2 Checklist 64
6.3 Starting a measurement 64
6.3.1 Startup messages 64
6.4 Measurement options 65
6.4.1 Switching Physiocal ON/OFF 65
6.4.2 Marking events 66
6.4.3 Checking run time information 67
6.5 Run time messages 67
6.6 Stopping a measurement 68
6.7 Data on a PC 68
6.7.1 Ohmeda protocol 69
6.7.2 Ohmeda protocol and HyperTerminal 69
7 Error messages and troubleshooting 71
7.1 Audible indicators 71
7.1.1 Key beeps 71
7.1.2 Error beeps 71
7.2 Error messages 72
7.2.1 Plethysmogram, finger cuff error messages 72
7.2.2 Air pressure, finger cuff error messages 73
7.2.3 Miscellaneous errors during a measurement 74
7.2.4 Errors due to missing sub device 74
7.2.5 Fatal internal errors 74
8 Maintenance, storage and calibration 77
8.1 Maintenance 77
8.2 Cleaning 77
8.3 Storage 78
8.4 Pressure calibration check 78
9 Specifications 79
9.1 Instrumental information 80
9.2 Instrumental accuracy 81
9.3 Analog signal outputs and signal inputs 82
To Next Page
Loading...
