86 Finometer® Model-2 User’s Guide
9.5
Electrical specifications
SpItem ecification
Power requirements
220 – 240 VAC, 50/60 Hz, 100 VA
(op
100 – 120 VAC, 50/60 Hz, 100 VA
tionally)
Main unit fuse 230V
(optionally for 115 V)
IE
IEC 127, 1.6 A slow blow
C 127, 0.8 A slow blow
Power cord
IEC 320 to local mains plug
(see Table 9.3 Power cord set)
Protection against electric
shock (EN 60601-1)
Degree of protection: type B applied
pa
Type of protection: Class I
equipment.
rt.
Protection against ingress of
water and/or objects
IP20
Power dissipation In main unit: < 100 W.
In Frontend Unit: 1 W.
In uff: < 50 mW.
finger c
CMOS back-up battery 3.6 V non-rechargeable Lithium.
One of the following types are used:
Sonnenschein SL-389 / Tadiran
TL5134. Sonnenschein SL-386 /
Tadiran TL5135. Tadiran SL-889.
Expected life time: 20 years.
To Next Page
Loading...