FINAPRES Finometer Model-2 - Page 87

Finometer® Model-2 User’s Guide 87
The following power supply cords can be used for the countries specified in
the table:
Manufacturer / Type /
model
Standard Mark(s) of
formity
Object /
part NO trademark
Technical data
con
Cord set Eurlectric
(Europe)
2pole,
class I
H05VV-F
Cord: 3xmin 0,75
10A,250V
HD21
MA,
E,
(CENELEC)
Plug: 10/16
IEC603
KE
A,250V
20
VD
mm2 appliance
Coupler:
Cord set
(UK)
WELL SHIN 2pole,
class I
5VV-F
,250V
ASTA
Plug: 10A,250V
Cord: 3xmin 0,75
IEC
60320
H0
mm2 appliance
Coupler:
10A
C13
Cord set
(Europe)
Different
Manufac-
2pole,
class I
/16
A,250V
Cord: 3xmin 0,75
mm2 appliance
Coupler:
IEC603
20
HD21
CENELEC
approved
turers
H05VV
Plug: 10
-F
10A,250V
Cord set *
(USA,CAN)
Ta Hsing 2pole,
class I
SVT
18 appliance
125V
IEC603
C13
UL,CSA
Plug: 10A, 125V
Cord: 3 x AWG
20
Coupler: 10A,
Cord set *
(USA,CAN)
Different
Manufac-
turers
2pole,
class I
SVT
Cord: 3 x AWG
18 appliance
Coupler: 10A,
125V
20
C13
Plug: 10A, 125V
IEC603
UL,CSA
Table 9.3 Power cord set
• For patient care equipment, where a “Hospital Grade” or “Hospital Only” MAINS
PLUG exist for the particular electrical rating in question, the MAINS PLUG of non-
PERMANENTLY INSTALLED EQUIPMENT with a protective earth connection shall
comply with the requirements for a hospital grade attachment plug (mains plug) or
the non-hazardous location locking type designated “Hospital Only” as specified in
the Standard for Attachment Plugs and Receptacles UL 498.