FINAPRES NOVA - A2.4.5 EMC Guidance and Manufacturers Declaration Tables

A2
Basic user manual
Finapres Nova
Version date: 04 April 2016
88
A2.4.3 Electrical
Power cord:
IEC 60320 C13 to local mains plug
AC power:
100 - 240 Vac, 50 / 60 Hz, 2A - 1A
Protection against electric
shock:
According EN 60601-1
Degree of protection:
Finger cuff, HCU, type B applied part
Type of protection: Class I equipment
Protection against ingress of
water and/or objects:
IP31
Power consumption:
In main unit: < 50 W, in Frontend Unit: 1 W, in
finger cuff: < 50 mW
The following power supply cords can be used for the countries specified in the
table.
Object /
part NO
Manufacturer /
trademark
Type / model
Technical data
Standard
Cord set
(Europe)
Eurlectric,
Different
Manufac-
turers
2pole, class I
H05VV-F
Plug: 10/16 A, 250V
Cord: 3xmin 0,75 mm2
appliance Coupler: 10A,
250V
IEC60320
HD21
Cord set
(UK)
WELL SHIN
2pole, class I
H05VV-F
Plug: 10A,250V
Cord: 3xmin 0,75 mm2
appliance Coupler:
10A,250V
IEC 60320
C13
Cord set *
(USA,CAN)
Ta Hsing,
Different
Manufac-
turers
2pole, class I
SVT
Plug: 10A, 125V
Cord: 3 x AWG 18
appliance Coupler: 10A,
125V
IEC60320
C13
* For patient care equipment, where a "Hospital Grade" or "Hospital Only" MAINS
PLUG exist for the particular electrical rating in question, the MAINS PLUG of non-
PERMANENTLY INSTALLED EQUIPMENT with a protective earth connection shall
comply with the requirements for a hospital grade attachment plug (mains plug)
or the non-hazardous location locking type designated "Hospital Only" as
specified in the Standard for Attachment Plugs and Receptacles UL 498.
A2.4.4 Environmental conditions
Operation temperature: 0 °C to 35 °C
Storage temperature: -20 °C to 70 °C
Humidity: 5 to 90 % non-condensing
Atmospheric pressure: 700 to 1100 hPa
Note: The device may not meet its performance specifications if stored or used
outside the ranges specified above.