FireFlex TOTALPAC2 - Time & Date Setting; Total Pac

Page 2 of 8 TOTALPAC2
TOTALPAC2 Integrated Fire Protection System
Control Section
FM-086G-0-29C
SYSTEM RESET: The RESET button breaks power to all
initiating circuits, 4-wire smoke power and will clear any
activated output circuits. If any alarm or trouble still exists
after reset, they will reactivate the panel.
1.5 Time & Date setting:
A- Press the "PROGRAM" switch down
B- Press on "FUNCTION" button until the following is
displayed;
SET TIME?
C- Press the "SELECT" button to get to the "MINUTES"
sub-menu;
01/21/2000
MINUTES 02:58:04
D- Use "SELECT" button to increase the minutes, or use
"SET" button to decrease minutes.
E- Press the "FUNCTION" button to get to the "HOURS"
sub-menu;
01/21/2000
HOURS 02:58:04
F- Use "SELECT" button to increase the hours, or use
"SET" button to decrease hours.
G- Press the "FUNCTION" button to get to the "DAY"
sub-menu;
DAY 01/21/2000
02:58:04
H- Use "SELECT" button to increase day,
or use ¨SET" button to decrease day.
I- Press the "FUNCTION" button to get to the "MONTH"
sub-menu;
MONTH 01/21/2000
02:58:04
J- Use "SELECT" button to increase month,
or use "SET" button to decrease month.
K- Press the "FUNCTION" button to get to the "YEAR"
sub-menu;
YEAR 01/21/2000
02:58:04
L- Use "SELECT" button to increase year,
or use "SET" button to decrease year.