Installation
20.10.22 Kapitel/Chapter 4: Installation - Seite/Page 31
Please note!Due to the terminals being exposed, the protection class
IP 04 applies to the iControl3 panel.
If properly installed with a seal (e.g. Sikaflex), up to IP66
can be achieved.
4.4 Wiring of the Panda iControl3 control unit
Fig. 4.4-1: Wiring of the Panda iControl3 control unit
The Panda iControl3 control unit is connected to the wire harness with a 42-pin socket, see “Terminal assignment
of the 42-pin socket” on page 32.
To Next Page
Loading...
