FJDynamics FJDZ42P - Powering on the Mower; Powering off the Mower; Driving the Mower

To Next Page

To Previous Page

- 38 -

FJDZ42P Electric Zero-turn Mower User Manual

7.2 Powering On the Mower

1. Press the start/stop button to power on the mower. The indicator illuminates.

2. Turn on the control terminal. The screen illuminates.

3. Enter the password to unlock the control terminal.

Note: It is recommended that you always start an operation with a slow driving speed

and blade speed.

4. Pull the two lap bars inward until they come into contact with the limits.

5. Press the blade switch on the control terminal screen to start the blades.

Note: Only start the blade motor when the lap bars are in the neutral position.

6. Push the lap bars forward to drive forward, and pull them backward to drive in reverse.

Note: The electromagnetic brake engages when the lap bars are placed back in the

parking position.

Note: The mower is not suited for road traffic. Do not drive it on public roads. Use trucks

to transport the mower.

7.3 Powering Off the Mower

DANGER

Do not suddenly stop the mower or reverse the direction, especially when working on a slope.

Rapid movement of the lap bars in either direction may result in loss of control that can cause

serious injuries.

1. Place the lap bars in the neutral position.

2. Turn off the blade switch on the control terminal screen to stop the blades.

3. Push the lap bars outward to the parking position.

4. Press the start/stop button to power off the mower.

7.4 Driving the Mower

After powering on the mower, engage the lap bars and steer the mower as follows:

To go forward

Push the two lap bars forward the same distance.