The accumulated grass clippings and dirt will harden, restricting blade rotation, and will probably
result in poorer cutting quality. Therefore, the grass clippings and dirt should be removed routinely.
To remove them, raise the cutting deck to the full up position with jack stands or blocks, and scrape
the grass clippings and dirt from underneath.
9.2 Tires and Wheels
9.2.1 Tires
The tire pressure must comply with the requirements of this manual. High tire pressure could lead
to tire burst, especially the front tires, resulting in injuries or even death. Inflating the tires with
compressed air will lead to a sharp increase in tire pressure. Specialized skills and tools are required
for tire repair. Contact the dealer for replacement or repair of tires, inner tubes, and rims.
Tire Pressure
Although the tire pressure has been preset to the specified value, it gradually decreases with time.
Check the tire pressure and inflate the tires as needed based on the tire appearance as follows.
Figure 33. Tires in different tire pressures
To Next Page
Loading...