batteries with a charger not designed for this product.
8.3 Charging the Lithium-ion Batteries
1. Press the start/stop button to power off the mower, and ensure that the indicator is off and the
mower comes to a complete stop.
2. Remove the dust cap from the battery charging port of the mower, and plug the charger into the
port.
Do not adjust the blades after the blade motor is started. The mower blades cannot be seen
and are located very close to the deck housing. Fingers and toes can be cut off instantly when
touching the blades.
4. It takes five to seven hours to fully charge the batteries with 220 V mains, and seven to nine
hours with 110 V mains. Remove the charger from the charging port after the batteries are fully
charged.
Remove the charger after the batteries are fully charged to avoid affecting the battery life and
battery lifespan.
5. Cover the battery charging port with the dust cap and start operating the mower.
Charging suggestions:
Each lithium-ion battery includes a battery management system (BMS), and therefore, does not
need to be fully discharged before recharging.
Batteries left uncharged will slowly discharge. Ensure that the mower batteries are fully charged
before using the mower for the first time after a long period of storage.
Fully charge the batteries every 30 days to maintain the battery lifespan when storing the mower
for a long period of time. Do not charge the batteries for too long.
During charging, ensure that the charger cooling fan inlet and outlet are not blocked.
To Next Page
Loading...