FJDynamics FJDZ42P - Installing, Disassembling, and Adjusting the Cutting Deck; Installing the Cutting Deck

- 45 -
©2022 FJDynamics. All rights reserved.
FJDZ42P Electric Zero-turn Mower User Manual
Figure 26. Turn over the seat
7.8 Installing, Disassembling, and Adjusting the Cutting
Deck
WARNING
Before disassembling the cutting deck, ensure that the mower is powered off and the lap bars
are in the parking position.
Disassemble the cutting deck on a flat ground, and ensure that the mower brake is engaged.
7.8.1 Installing the Cutting Deck
1. Put the cutting deck on the right side of the mower, and slide it under the mower chassis as
shown in the figure below.