FJDynamics FJDZ42P - Disassembling the Cutting Deck; Slope Operation

- 48 -
©2022 FJDynamics. All rights reserved.
FJDZ42P Electric Zero-turn Mower User Manual
Figure 30. Adjust the levelness and height of the cutting deck
No.
Name
1
Adjustment lever
2
Rear rod (on both sides)
7.8.3 Disassembling the Cutting Deck
To disassemble the cutting deck, reverse the foregoing steps.
WARNING
The cutting deck needs to be installed or disassembled by professionals with professional
devices.
7.9 Slope Operation
Note: Do not operate on a slope greater than 15°. Slopes are a major cause related to
loss of control and tip-over accidents, which can result in severe injury or death.
Operations on slopes require extra caution. If you feel uneasy to drive the mower on the
slope, stop the operation.
 Pay extra caution when operating on a slope.