FJDynamics FJDZ42P - Page 85

- 77 -
©2022 FJDynamics. All rights reserved.
FJDZ42P Electric Zero-turn Mower User Manual
Problem
Cause
Solution
The mower cannot be started.
harness terminals below the
start/stop button are bad or
failing.
reconnect them to the
start/stop button. If the pins
of the wiring harness are
loose, contact your dealer for
repair.
Harness connections below
the seat and connectors to
the batteries are loose.
Check and plug in the
connectors.
The motor does not work.
Power harnesses or
communication harnesses to
motors are faulty.
Check for loose connectors or
continuity of the power
harnesses and
communication harnesses,
and contact your dealer for
repair if necessary.
The switches do not work.
The connectors are loose or
the pins are loose.
Locate the faulty switch
according to instructions
shown on the screen, check
for abnormality in the
connectors of the switch, and
contact the dealer for repair if
necessary.