Introduction
1.4 Copyright
M3560-02en Edition 09/2022 13
1. Procedural instructions are shown as a numbered list. Always perform the steps in the
order given.
• Lists are formatted as bulleted lists.
– The dash is used for lists at the second level.
(1) Numbers in brackets are part numbers.
1.4 Copyright1.4 Copyright
The copyright of these instructions is held by Flender.
These instructions must not be used wholly or in parts without our authorisation or be given
to third parties.
If you have any technical queries, please contact our factory or one of our service outlets
(refer to Service and support (Page53)).
To Next Page
Loading...
