Assembly
5.4 Fill with lubricant
M3560-02en Edition 09/2022 37
• The list of greases with viscosity class NLGI 00 or NLGI 0 according to DIN 51818 can
be found in the document “K SEMI-FLUID GREASES”.
An excerpt from the table can be found here:
Lubricant recommendation – greases
Manufacturer Ambient temperature -10°C to +80°C
Type
ARAL Aralub FDP 00
BP Energrease LS-EP 00
Castrol Tribol GR 100 - 00 PD
Flender Flender high-performance grease
Fuchs Renolit SO-GFB
Grafloscon C-SG 500 Plus
ExxonMobil Mobilux EP004
Shell Gadus S2 V220 00
TotalEnergies Multis EP 00
NOTICE
The quality and purity of the lubricant dictate the service life of the sealing rings.
5.4.2 Filling quantity5.4 Fill with lubricant
WARNING
Severe personal injury due to flying fragments
Severe personal injury due to flying fragments and/or damage to coupling possible.
If a coupling bursts in an area at risk of explosion, then this can result in an explosion.
• Observe the prescribed filling quantities.
Information
Refer to the dimension drawings for the grease filling quantities for the ZNNV and ZNZV
types.
The following table lists the grease filling quantities for the ZNN, ZNNA, ZNZS and ZNZA
types.
To Next Page
Loading...
