M3560-02en Edition 09/2022 15
Safety information
2
2.1 General information2.1 General information
Instructions
These instructions are part of the delivery. Always keep these instructions close to the coup-
ling.
Please make sure that every person who is commissioned to work on the coupling has read
and understood these instructions prior to handling the coupling and observes all of the
points.
Only the knowledge of these instructions can avoid faults on the coupling and ensure fault-
free and safe operation. Non-adherence to the instructions can cause product or property
damage or personal injury. Flender does not accept any liability for damage or operating fail-
ures that are due to non-adherence to these instructions.
State of the art
The coupling described here has been designed in consideration of the latest findings for de-
manding technical requirements. This coupling is state-of-the-art at the time of printing these
instructions.
In the interest of further development, Flender reserves the right to make such changes to
the individual assembly units and accessories that increase performance and safety while
maintaining the essential features.
Symbols
ISO ANSI Warning
Warning – hazardous electrical voltage
Warning – explosive substances
--- Warning – entanglement hazard
--- Warning – hot surfaces
--- Warning – corrosive substances
--- Warning – suspended load
To Next Page
Loading...
