FLENDER ZAPEX - 11.2 Spare Parts Drawing and List

Replacement parts
11.2 Spare parts drawing and spare parts list
58 Edition 09/2022 M3560-02en
11.2 Spare parts drawing and spare parts list11.2 Spare parts drawing and spare parts list
11.2.1 Spare parts list11.2 Spare parts drawing and spare parts list
Part
num-
ber
Designation ZNN ZNNA ZNNV ZNZS ZNZA ZNZV
1 Coupling part 1/2 x x x x x x
2 Coupling part 1/2 x x x x x x
4 Spacer x x x
5 Flanged sleeve x x x x x x
6 Screw plug x x x x x x
7 Sealing ring
1)
x x x x x x
8 Fitting bolt x x x x x x
9 Hexagon nut x x x x x x
12 O-ring x x x x x x
20 Plate pulley
2)
x x x
22 Screw plug
3)
33 Support ring x x
34 Thrust element x x
50 Sealing compound
(Liquid plastic Loc-
tite5922)
x x x x x x
51 Retaining ring x
Table11-1: Spare parts list for ZNN, ZNNA, ZNNV, ZNZS, ZNZA and ZNZV types
1)
Sealing ring (7) is only available for size 83. For the other sizes, the sealing ring is incorporated into
the screw plug (6).
2)
The plate pulley (20) is flanged into the spacer (4). As a replacement, Flender only supplies the com-
plete spacer (4) with plate pullies (20). For the ZNZS type with spacer lengthsLZ≤200, the spacer (4)
is designed without plate pullies (20).
3)
Screw plugs (22) are only used in combination with hydraulic interference fit.
You can find a description of the screw plug (22) in Section Screw plug (Page60).