FLENDER ZAPEX - Page 7

M3560-02en Edition 09/2022 7
List of tables
Table2-1 General warnings .......................................................................................................................15
Table2-2 Temperature classes for explosive atmospheres as a result of gases, vapours or mists ..........18
Table4-1 Types of preservative agents for long-term storage...................................................................24
Table5-1 Recommended assigned fits for bores with parallel key connection..........................................26
Table5-2 Diameter and axial position of the threaded hole, tightening torque and width A/F ...................28
Table5-3 Grease filling quantity.................................................................................................................38
Table7-1 Table of faults.............................................................................................................................42
Table8-1 Operating temperatures, operating hours and years of use.......................................................47
Table11-1 Spare parts list for ZNN, ZNNA, ZNNV, ZNZS, ZNZA and ZNZV types ...................................58
TableA-1 Speeds, geometry data and weights for coupling sizes 83 to 424 .............................................66
TableA-2 Clearance S................................................................................................................................67
TableA-3 Distances between teeth VA and recommended alignment values for radial and angular
misalignment ..............................................................................................................................68
TableA-4 Tightening torques and widths A/F.............................................................................................68
TableA-5 Tightening procedure .................................................................................................................69
TableA-6 O-rings........................................................................................................................................70