FlexGain PLEX - Page 34

User’s manual FlexGain Plex, V2
Version 1.3 34 from 99
Example:
To access the devices presented in Fig. 9 via TELNET, it is necessary:
1. Open the TELNET session for the FlexGain Plex, V2 device
2. To access IAD№1, enter the command %105
3. To access Plex, enter the command %107
4. To access RGN (IAD and RGN being the devices of the FlexDSL Orion family), enter
the command %10510
Figure 9. Management by the MONITOR bus.
5. To access IAD№2, enter the command- %105120.
If no symbols are transmitted to the modem via the Telnet connection within five
minutes, the connection breaks and, if necessary, the Monitor bus is disconnected.
04
F
L
E
X
G
A
I
N
P
L
E
X,
V2
04
I
A
D
№ 1
P
L
E
X
06
M
G
S
14
………..
FG-R-W-E
RGN
IAD № 2
xDSL
xDSL
Management PC
Ethernet
LAN