User’s manual FlexGain Plex, V2
Version 1.3 61 from 99
To display the help information, enter <BAUDRATE /H>.
The use of the <BAUDRATE> command without any parameters displays the
current baud rate of the RS-232 port.
Example:
PLEX2_01_CM>BAUDRATE /H
------------------------------------------------------------
Command:BAUDRATE- display/set console COM channel baudrate
------------------------------------------------------------
BAUDRATE :display current console COM channel baudrate
BAUDRATE 9600 :set 9600 bps for console COM channel
BAUDRATE 19200 :set 19200 bps
BAUDRATE 38400 :set 38400 bps
BAUDRATE 57600 :set 57600 bps
BAUDRATE 115200 :set 115200 bps
------------------------------------------------------------
PLEX2_01_CM>BAUDRATE 115200
PLEX2_01_CM>BAUDRATE
Console RS232 channel baudrate is 115200 bps.
PLEX2_01_CM>
<CONFIG> command.
The <CONFIG> command displays information on operation modes and
configurations of the multiplexer.
Command syntax:
<CONFIG>|
(<CONFIG> <PORT>)|
(<CONFIG> <STREAM>)
where
PORT displays the configurations of voice ports;
STREAM displays configurations of V35, E1 and ETHERNET ports.
To display the help information, enter <CONFIG /H>.
Example:
PLEX2_01_CM>CONFIG PORT
Module signal ports configuration:
----------------------------------------------------------------------------
Port Type Signaling State PB RB PTS STS GainRX GainTX LEC NRT
----------------------------------------------------------------------------
P1 2EM TRANSPARENT LOCK 54 55 ---- ---- 0.00db 0.00db No 10mv
P2 2EM TRANSPARENT LOCK 54 55 ---- ---- 0.00db 0.00db No 10mv
P3 2EM TRANSPARENT LOCK 54 55 ---- ---- 0.00db 0.00db No 10mv
P4 2EM TRANSPARENT LOCK 54 55 ---- ---- 0.00db 0.00db No 10mv
P5 FXO TRANSPARENT LOCK 54 55 ---- ---- 0.00db 0.00db No 10mv
P6 FXO TRANSPARENT LOCK 54 55 ---- ---- 0.00db 0.00db No 10mv
P7 FXO TRANSPARENT LOCK 54 55 ---- ---- 0.00db 0.00db No 10mv
P8 FXO TRANSPARENT LOCK 54 55 ---- ---- 0.00db 0.00db No 10mv
----------------------------------------------------------------------------
PLEX2_01_CM>