Flexim FLUXUS WW - Hotcodes

FLUXUS WW 9 Start-up of the transmitter
70 UMFLUXUS_WWV1-1EN, 2018-02-28
9.4.3 Navigation
9.5 HotCodes
A HotCode is a key sequence that activates certain functions and settings:
A HotCode can be entered in the main menu after pressing key C. The HotCode is not displayed during the input.
If a vertical arrow (↕) is displayed, the menu item contains a scroll list. The current list item is displayed in the lower line.
Press key and to scroll and select a list item in the lower line. Press ENTER.
Some menu items contain a horizontal scroll list in the lower line. The selected list item is displayed in capital letters and
in angle brackets.
Press key and to scroll and select a list item in the lower line. Press ENTER.
Some menu items contain a horizontal scroll list in the upper line. The selected list item is displayed in capital letters and
in angle brackets. The current value of the list item is displayed in the lower line.
Press key and to scroll and select a list item in the upper line.
Press key and to scroll through the lower line and select a value for the selected
list item.
Press ENTER.
function HotCode see section deactivation
language selection 9090xx 9.6
enabling the FastFood mode 007022 12.8.1 HotCode 007022
manual input of the lower limit for the inner pipe diameter 071001 12.10
activation of the SuperUser mode 071049 15.1 HotCode 071049
reset the display contrast to medium 555000 14.4
Parameter ↕
for Channel A:
8
2
Lining
no >YES<
4
6
R1=FUNC<typ mode
Function: MAX
4
6
8
2