1 Introduction FLUXUS WW
UMFLUXUS_WWV1-1EN, 2018-02-28 9
1 Introduction
1.1 Regarding this user manual
This user manual has been written for users operating the ultrasonic flowmeter FLUXUS. It contains important information
about the transmitter, how to handle it correctly, and how to avoid damages.
Read the safety instructions carefully. Make sure you have read and understood this user manual before using the mea-
suring instrument.
All reasonable effort has been made to ensure the correctness of the content of this user manual. If you, however, find
some erroneous information, please inform us. We will be grateful for any suggestions and comments regarding the con-
cept and your experience working with the measuring instrument.
This will ensure that we can enhance our products for the benefit of our customers and in the interest of technical prog-
ress. If you have any suggestions about improving the documentation and particularly this user manual, please let us
know so that we can consider your comments for future reprints.
The contents of this user manual are subject to changes without prior notice. All rights reserved. No part of this user man-
ual may be reproduced in any form without FLEXIM's written permission.
1.2 Safety instructions
The user manual contains instructions that are marked as follows:
Observe these safety instructions!
1.3 Warranty
We warrant the reliability of the material and workmanship of FLUXUS for the term specified in the sales contract, provid-
ed the measuring instrument is used for the purpose for which it was designed, and operated according to the instructions
given in this user manual. Improper use of the FLUXUS leads to the withdrawal of any warranties of any kind, explicit or
implicit.
Improper use includes:
• replacement of a component of FLUXUS with a component that was not approved by FLEXIM
• unsuitable or insufficient maintenance
• repair of FLUXUS by unauthorized personnel
FLEXIM assumes no responsibility neither for damages to the customer or third persons directly caused by material failure
due to unpredictable defects in the product nor for any indirect damages.
FLUXUS is a very reliable instrument. It is manufactured under strict quality control using modern production techniques.
If installed as recommended in an appropriate location, used cautiously and serviced conscientiously, no troubles should
appear.
If any problem appears which cannot be solved with the help of this user manual (see chapter 17), contact our sales office
and give a precise description of the problem. Specify the type, the serial number and the firmware version of the transmit-
ter.
Attention! Observe the "Safety instructions for the use in explosive atmospheres" (see SIFLUXUS document).
Note! For technical data see Technical specification.
Note! This text contains important information about the use of the transmitter.
Attention! This text contains important instructions which should be observed to avoid damage or destruction of
the measuring instrument. Proceed with special care!
This text contains safety instructions for the use in explosive atmospheres.
To Next Page
Loading...
Need help?
General
