5 Transport and storage
PIOX R721 5.1 Transport
19
UMPIOX_F72xV1-3EN, 2021-09-01
5 Transport and storage
5.1 Transport
The measuring equipment must be packaged properly for transport. For weight indications, see technical specification.
• Use, if possible, the original packaging by FLEXIM or an equivalent cardboard box.
• Position the transmitter, sensors and accessories in the middle of the cardboard box.
• Fill any voids with appropriate packaging material (e.g., paper, foam, bubble wrap).
• Protect the cardboard box against humidity.
5.2 Storage
Store the measuring equipment in a dry place.
Caution!
When packaging, the transmitter can fall down.
There is a danger of crushing body parts or damaging the measuring equipment.
→ Secure the transmitter against falling during packaging.
→ Wear the required personal protective equipment.
→ Observe the applicable rules.
Caution!
When lifting, the center of gravity of the transmitter can be displaced within the cardboard box. The
transmitter can fall down.
There is a danger of crushing body parts or damaging the measuring equipment.
→ Secure the transmitter against falling during transport.
→ Wear the required personal protective equipment.
→ Observe the applicable rules.
To Next Page
Loading...
