Flexim PIOX R721 User Manual

15 Data logger
15.2 Deletion of the data logger PIOX R721
2021-09-01, UMPIOX_F72xV1-3EN
82
Further parameters for storing
It can be defined whether the following parameters are to be stored together with the measured values.
• Select Yes to store the value. Select No in order not to store the value.
Acoustic signal during the storing
The storing of each measured value can be acoustically signalized. The signal can be activated or deactivated in the
menu Data logger \Configuration\Beep on storage.
• Select On to activate the acoustic signal. Select Off to deactivate the acoustic signal.
• Press ENTER.
15.2 Deletion of the data logger
• Select the menu item Delete meas. values.
• Press ENTER.
• Select Yes to delete the measured values. Select No if the measured values are not to be stored.
• Press ENTER.
Tab. 15.1: Parameters for storing
display description of the parameters
Store diagnost. values diagnostic values
Store transd. temp. sensor temperature
Data logger\ Configuration\Beep on storage
Data logger\Delete meas. values

Flexim PIOX R721 Specifications

General

Brand	Flexim
Model	PIOX R721
Category	Measuring Instruments
Language	English